We can supply all kinds of no-hub cast iron fittings which can meet EN877, DIN19522 standard, and also many special shapes fittings can be supplied.
The full range of EN877 cast iron fittings is from DN50 to DN300. Besides the common EN877 cast iron fitting items such as bends, branches, caps and reducers, we also can supply special fittings such as bend with access door, branch with access door, short pipe with access door and anti-siphonic trap, etc.
The materials are 100% reusable and recyclable, with low sound transmission, fire proof, leak proof and anti-corrosive. They are widely used for evacuation of water from buildings, drainage, waste and vent. Also rainwater system installed outside buildings and buried system underground can be supplied. The fittings are installed in residential buildings and houses, hotels, hospitals and shopping malls.
The EN877 cast iron fittings internal and external coating is red epoxy resin with a thickness of at least 70um, epoxy powder with a thickness of at least 120µm with red colour.
The raw iron is accordance with ISO185, fitting mechanical properties tensile strength min.150Mpa. Maximum Brinell hardness HB260.
External and internal coating is best quality. Internal coating resistance to salt spray: at least 350hours, common 700hours. Resistance to waster water: at least 30 days at 23 degrees centigrade. Chemical resistance from PH2 to PH12 at least 30 days at 23 degrees centigrade. Resistance to temperature cycling: 1500 cycles between to 15-93 degree centigrade.
Post time: Mar-12-2021