Welcome to our website!
news_banner

EN877 Cast iron fittings

  • Short Pipe with Oval Door

    Short Pipe with Oval Door

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    Short Pipe with Oval     Rectangular Door

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.

  • 45 Degree Single Branch

    45 Degree Single Branch

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    45° Single Branch  88° Single Branch

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.

  • Cast Iron Drain Pipe Fittings Flange Adaptor

    Cast Iron Drain Pipe Fittings Flange Adaptor

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    Reducer/Flange Adaptor/Down Pipe Support/Bearing Ring

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.

  • Cast Iron Drain Pipe Fittings Down Pipe Support

    Cast Iron Drain Pipe Fittings Down Pipe Support

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    Reducer/Flange Adaptor/Down Pipe Support/Bearing Ring

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.

  • Cast Iron Drain Pipe Fitting Bearing Ring

    Cast Iron Drain Pipe Fitting Bearing Ring

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    15° short bend DN50-DN200    30° short bend DN50-DN200

    45°short bend DN40-DN300    68°short bend DN40-DN300

    88°short bend DN40-DN300    88°double bend DN50-DN150

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃

  • Cast Iron Soil Pipe Fittings Reducer

    Cast Iron Soil Pipe Fittings Reducer

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    Reducer/Flange Adaptor/Down Pipe Support/Bearing Ring

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.

  • 88 Degree Double Bend

    88 Degree Double Bend

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    15° short bend DN50-DN200    30° short bend DN50-DN200

    45°short bend DN40-DN300    68°short bend DN40-DN300

    88°short bend DN40-DN300    88°double bend DN50-DN150

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃

  • 88 Degree Short Bend

    88 Degree Short Bend

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    15° short bend DN50-DN200    30° short bend DN50-DN200

    45°short bend DN40-DN300    68°short bend DN40-DN300

    88°short bend DN40-DN300    88°double bend DN50-DN150

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.

  • 68 Degree Short Bend

    68 Degree Short Bend

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    15° short bend DN50-DN200    30° short bend DN50-DN200

    45°short bend DN40-DN300    68°short bend DN40-DN300

    88°short bend DN40-DN300    88°double bend DN50-DN150

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.

  • 45 Degree Short Bend

    45 Degree Short Bend

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    15° short bend DN50-DN200    30° short bend DN50-DN200

    45°short bend DN40-DN300    68°short bend DN40-DN300

    88°short bend DN40-DN300    88°double bend DN50-DN150

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.

  • 30 Degree Short Bend

    30 Degree Short Bend

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    15° short bend DN50-DN200    30° short bend DN50-DN200

    45°short bend DN40-DN300    68°short bend DN40-DN300

    88°short bend DN40-DN300    88°double bend DN50-DN150

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.

  • 15 Degree Short Bend

    15 Degree Short Bend

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    15° short bend DN50-DN200    30° short bend DN50-DN200

    45°short bend DN40-DN300    68°short bend DN40-DN300

    88°short bend DN40-DN300    88°double bend DN50-DN150

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.