Welcome to our website!
news_banner

Nine advantages of grooved fittings

Nine advantages of grooved fittings

1. Fast.  Use grooved clamps to connect, and use the corresponding fittings to place the pipeline. There is no need for welding, no secondary galvanizing, and no secondary placement during construction. This can increase the placement rate.

  

2, light.  The clamp connection is light in weight, less in number of bolts, and convenient in installation.

  

3. Reliability.  The grooved pipe is sealed to ensure the reliability of the connection and sealing.

  

4.Safety in use. Use grooved clamps to connect and connect with corresponding pipe fittings. Therefore, only mechanical assembly is required, no welding is required, and there is no open flame. Therefore, there is no welding slag cloudy pipeline, which can ensure the safety of the construction site, which is especially suitable for starting construction under fire-proof conditions.

 

5. Economy. Due to the quick placement, no extra operation is required, and the placement repair rate is low, the comprehensive placement cost is lower

 

6. Save space. The grooved clamp connection occupies about 70% of the space of the flange, and due to the small number of fastening bolts and no objectivity. Therefore, this method is suitable for starting construction under the condition of narrow space.

 

7.Maintenance is simple. As long as the installation is correct, the pipeline will run safely and pass the test. And usually do not need maintenance, spare parts do not need to be replaced for decades.

 

8. Applicable pipes are universal. The grooved clamp connection can be used to connect seamless steel pipes, galvanized steel pipes, welded steel pipes, stainless steel pipes, copper pipes and other metal pipes.

 

9. Flexible connection of pipelines can be realized. The pipeline connected by the flexible groove clamp is a flexible system, which can absorb the length displacement of the pipe due to temperature changes, and allow the pipe to have a certain degree of deflection angle. 

poster1poster3


Post time: Jul-22-2022