Welcome to our website!

EN877 Gray Cast Iron Pipes

  • EN877 SML Hubless Cast Iron Pipe

    EN877 SML Hubless Cast Iron Pipe

    The SML no-hub cast iron drainage pipes and fittings meet the standard of BSEN877, DIN19522, ISO6594. The materials are 100% reusable and recyclable, with low sound transmission, fire proof, leak proof and anti-corrosive. They are widely used for evacuation of water from buildings, drainage, waste and vent. Also rainwater systerm installed outside buildings and buried system underground can be supplied.

    The EN877pipes outside coating is red, epoxy with a thickness of not less than 70um. Inside coating is yellow epoxy resin with a thickness of 120um. Or inside and outside are more than 120μm powder epoxy coating with red colour.

    The fittings are also red inside and outside, liquid epoxy resin is over 70um, and powder epoxy is over 120um thick.

  • EN877 BML Hubless Cast Iron Pipe

    EN877 BML Hubless Cast Iron Pipe

    BML drainage pipes are for bridge drain system.

    Outside coating: BML pipes bear a spray zinc coating of at least 40um layer thickness(290g/㎡), over that will spray a silver gray epoxy resin coating at least 80um.

    Inside coating is the same epoxy resin 120um same as SML pipe.

  • EN877 KML Hubless Cast Iron Pipe

    EN877 KML Hubless Cast Iron Pipe

    KML drainage pipe and fittings are used for grease-containing waste water of professional kitchens and similar facilities.

    Outside coating: Bear a spray zinc coating with an areal density of min 130g/㎡, and above that an epoxy cover of a minimum of 70um.

    Inside coating is orche-coloured epoxy.A double layer of resin epoxy with a total layer thickness 240um.

    KML fittings are coated inside and outside with a high quality powder epoxy of least 120um.

  • EN877 TML Hubless Cast Iron Pipe

    EN877 TML Hubless Cast Iron Pipe

    TML drainage pipes is based on EN 877, that the use of SML pipes for underground installation.

    Outside coating: TML pipes bear a spray zinc coating with a density of 130g/㎡, over that there is a brown or red cover coat.

    Inside coating: The coating is orche colour,epoxy 120um.

    Fittings: Epoxy powder coating red, 120um at least.

  • BS4622 437 416 Gray Iron Pies

    BS4622 437 416 Gray Iron Pies

    Grey Iron Socket and Spigot Pressure Pipes has long been employed by the construction industry as a reliable and inexpensive drainage system. They are in accordance to the standard of BS4622,BS437 and BS416.The gray iron pipes are manufactured by centrifugal casting in metal moulds,The coating will be bitumen or black epoxy resin.

    BS4622 Sinle Spigot cast iron drain pipe with flexible rubber ring joint,DN100-DN700 , Length:1830mm, 4110mm and 5120mm

    BS437 Sinle Spigot cast iron drain pipe with flexible rubber ring joint. DN75-DN225 length 1830mm+-5mm

    BS416 Single Spigot cast iron drain pipe D50-DN150

    1.Tensile Strength > 150 N/mm2

    2.Hydrostatic Pressure (3.45 bar for 15 sec.)